curve

The curve type models a linear, spline or gamma curve. More...

## Data Structures

struct | stp_curve_point_t
| Point (x,y) for piecewise curve. More...

## Typedefs

typedef struct stp_curve | stp_curve_t
| The curve opaque data type.

## Enumerations

enum | stp_curve_type_t { STP_CURVE_TYPE_LINEAR , STP_CURVE_TYPE_SPLINE }
| Curve types. More...
enum | stp_curve_wrap_mode_t { STP_CURVE_WRAP_NONE , STP_CURVE_WRAP_AROUND }
| Wrapping mode. More...
enum | stp_curve_compose_t { STP_CURVE_COMPOSE_ADD , STP_CURVE_COMPOSE_MULTIPLY , STP_CURVE_COMPOSE_EXPONENTIATE }
| Composition types. More...
enum | stp_curve_bounds_t { STP_CURVE_BOUNDS_RESCALE , STP_CURVE_BOUNDS_CLIP , STP_CURVE_BOUNDS_ERROR }
| Behaviour when curve exceeds bounds. More...

## Functions

stp_curve_t * | stp_curve_create (stp_curve_wrap_mode_t wrap)
| Create a new curve.
stp_curve_t * | stp_curve_create_copy (const stp_curve_t *curve)
| Copy and allocate a curve.
void | stp_curve_copy (stp_curve_t *dest, const stp_curve_t *source)
| Copy a curve.
stp_curve_t * | stp_curve_create_reverse (const stp_curve_t *curve)
| Reverse and allocate a curve.
void | stp_curve_reverse (stp_curve_t *dest, const stp_curve_t *source)
| Reverse a curve.
void | stp_curve_destroy (stp_curve_t *curve)
| Destroy an curve.
int | stp_curve_set_bounds (stp_curve_t *curve, double low, double high)
| Set the lower and upper bounds on a curve.
void | stp_curve_get_bounds (const stp_curve_t *curve, double *low, double *high)
| Get the lower and upper bounds on a curve.
stp_curve_wrap_mode_t | stp_curve_get_wrap (const stp_curve_t *curve)
| Get the wrapping mode.
int | stp_curve_is_piecewise (const stp_curve_t *curve)
| Determine whether the curve is piecewise.
void | stp_curve_get_range (const stp_curve_t *curve, double *low, double *high)
size_t | stp_curve_count_points (const stp_curve_t *curve)
| Get the number of allocated points in the curve.
int | stp_curve_set_interpolation_type (stp_curve_t *curve, stp_curve_type_t itype)
| Set the curve interpolation type.
stp_curve_type_t | stp_curve_get_interpolation_type (const stp_curve_t *curve)
| Get the curve interpolation type.
int | stp_curve_set_data (stp_curve_t *curve, size_t count, const double *data)
| Set all data points of the curve.
int | stp_curve_set_data_points (stp_curve_t *curve, size_t count, const stp_curve_point_t *data)
| Set all data points of the curve.
int | stp_curve_set_float_data (stp_curve_t *curve, size_t count, const float *data)
| Set the data points in a curve from float values.
int | stp_curve_set_long_data (stp_curve_t *curve, size_t count, const long *data)
| Set the data points in a curve from long values.
int | stp_curve_set_ulong_data (stp_curve_t *curve, size_t count, const unsigned long *data)
| Set the data points in a curve from unsigned long values.
int | stp_curve_set_int_data (stp_curve_t *curve, size_t count, const int *data)
| Set the data points in a curve from integer values.
int | stp_curve_set_uint_data (stp_curve_t *curve, size_t count, const unsigned int *data)
| Set the data points in a curve from unsigned integer values.
int | stp_curve_set_short_data (stp_curve_t *curve, size_t count, const short *data)
| Set the data points in a curve from short values.
int | stp_curve_set_ushort_data (stp_curve_t *curve, size_t count, const unsigned short *data)
| Set the data points in a curve from unsigned short values.
stp_curve_t * | stp_curve_get_subrange (const stp_curve_t *curve, size_t start, size_t count)
| Get a curve containing a subrange of data.
int | stp_curve_set_subrange (stp_curve_t *curve, const stp_curve_t *range, size_t start)
const double * | stp_curve_get_data (const stp_curve_t *curve, size_t *count)
| Get a pointer to the curve's raw data.
const stp_curve_point_t * | stp_curve_get_data_points (const stp_curve_t *curve, size_t *count)
| Get a pointer to the curve's raw data as points.
const float * | stp_curve_get_float_data (const stp_curve_t *curve, size_t *count)
| Get pointer to the curve's raw data as floats.
const long * | stp_curve_get_long_data (const stp_curve_t *curve, size_t *count)
| Get pointer to the curve's raw data as longs.
const unsigned long * | stp_curve_get_ulong_data (const stp_curve_t *curve, size_t *count)
| Get pointer to the curve's raw data as unsigned longs.
const int * | stp_curve_get_int_data (const stp_curve_t *curve, size_t *count)
| Get pointer to the curve's raw data as integers.
const unsigned int * | stp_curve_get_uint_data (const stp_curve_t *curve, size_t *count)
| Get pointer to the curve's raw data as unsigned integers.
const short * | stp_curve_get_short_data (const stp_curve_t *curve, size_t *count)
| Get pointer to the curve's raw data as shorts.
const unsigned short * | stp_curve_get_ushort_data (const stp_curve_t *curve, size_t *count)
| Get pointer to the curve's raw data as unsigned shorts.
const stp_sequence_t * | stp_curve_get_sequence (const stp_curve_t *curve)
| Get the underlying stp_sequence_t data structure which stp_curve_t is derived from.
int | stp_curve_set_gamma (stp_curve_t *curve, double f_gamma)
| Set the gamma of a curve.
double | stp_curve_get_gamma (const stp_curve_t *curve)
| Get the gamma value of the curve.
int | stp_curve_set_point (stp_curve_t *curve, size_t where, double data)
| Set a point along the curve.
int | stp_curve_get_point (const stp_curve_t *curve, size_t where, double *data)
| Get a point along the curve.
int | stp_curve_interpolate_value (const stp_curve_t *curve, double where, double *result)
| Interpolate a point along the curve.
int | stp_curve_resample (stp_curve_t *curve, size_t points)
| Resample a curve (change the number of points).
int | stp_curve_rescale (stp_curve_t *curve, double scale, stp_curve_compose_t mode, stp_curve_bounds_t bounds_mode)
| Rescale a curve (multiply all points by a scaling constant).
int | stp_curve_write (FILE *file, const stp_curve_t *curve)
| Write a curve to a file.
char * | stp_curve_write_string (const stp_curve_t *curve)
| Write a curve to a string.
stp_curve_t * | stp_curve_create_from_stream (FILE *fp)
| Create a curve from a stream.
stp_curve_t * | stp_curve_create_from_file (const char *file)
| Create a curve from a stream.
stp_curve_t * | stp_curve_create_from_string (const char *string)
| Create a curve from a string.
int | stp_curve_compose (stp_curve_t **retval, stp_curve_t *a, stp_curve_t *b, stp_curve_compose_t mode, int points)
| Compose two curves, creating a third curve.

## Detailed Description

The curve type models a linear, spline or gamma curve.

curve "inherits" from the sequence data structure (implemented via containment), since the curve data is represented internally as a sequence of numbers, for linear and spline curves. Linear Piecewise Curves (LPCs) should be implemented in the future which represent a curve in a more compact format.

Various operations are supported, including interpolation and composition.

## Typedef Documentation

## stp_curve_t

typedef struct stp_curve stp_curve_t

The curve opaque data type.

## Enumeration Type Documentation

## stp_curve_bounds_t

enum stp_curve_bounds_t

Behaviour when curve exceeds bounds.

Enumerator
STP_CURVE_BOUNDS_RESCALE | Rescale the bounds.
STP_CURVE_BOUNDS_CLIP | Clip the curve to the existing bounds.
STP_CURVE_BOUNDS_ERROR | Error if bounds are violated.

## stp_curve_compose_t

enum stp_curve_compose_t

Composition types.

Enumerator
STP_CURVE_COMPOSE_ADD | Add composition.
STP_CURVE_COMPOSE_MULTIPLY | Multiply composition.
STP_CURVE_COMPOSE_EXPONENTIATE | Exponentiate composition.

## stp_curve_type_t

enum stp_curve_type_t

Curve types.

Enumerator
STP_CURVE_TYPE_LINEAR | Linear interpolation.
STP_CURVE_TYPE_SPLINE | Spline interpolation.

## stp_curve_wrap_mode_t

enum stp_curve_wrap_mode_t

Wrapping mode.

Enumerator
STP_CURVE_WRAP_NONE | The curve does not wrap.
STP_CURVE_WRAP_AROUND | The curve wraps to its starting point.

## Function Documentation

## stp_curve_compose()

int stp_curve_compose | ( | stp_curve_t ** | retval,
|  | stp_curve_t * | a,
|  | stp_curve_t * | b,
|  | stp_curve_compose_t | mode,
|  | int | points
| ) |  |

extern

Compose two curves, creating a third curve.

Only add and multiply composition is currently supported. If both curves are gamma curves with the same sign, and the operation is multiplication or division, the returned curve is a gamma curve with the appropriate number of points. Both a and b must have the same wraparound type.

Parameters

  retval | a pointer to store the location of the newly-created output curve in.
  a | the first source curve.
  b | the second source curve.
  mode | the composition mode.
  points | the number of points in the output curve (must not exceed 1048576). It must be at least two, unless the curve is a gamma curve and the operation chosen is multiplication or division. If -1, the resulting number of points will be the least common multiplier of the number of points in the input and output curves (but will not exceed 1048576).

Returns
  FALSE if element-wise composition fails.

## stp_curve_copy()

void stp_curve_copy | ( | stp_curve_t * | dest,
|  | const stp_curve_t * | source
| ) |  |

extern

Copy a curve.

Both dest and source must be valid curves previously created with stp_curve_create().

Parameters

  dest | the destination curve.
  source | the source curve.

## stp_curve_count_points()

size_t stp_curve_count_points | ( | const stp_curve_t * | curve | ) |

extern

Get the number of allocated points in the curve.

Parameters

  curve | the curve to use.

Returns
  the number of points.

## stp_curve_create()

stp_curve_t * stp_curve_create | ( | stp_curve_wrap_mode_t | wrap | ) |

extern

Create a new curve.

Curves have y=lower..upper. The default bounds are 0..1. The default interpolation type is linear. There are no points allocated, and the gamma is defaulted to 1. The curve is a dense (equally-spaced) curve.

A wrapped curve has the same value at x=0 and x=1. The wrap mode of a curve cannot be changed except by routines that destroy the old curve entirely (e. g. stp_curve_copy, stp_curve_read).

Parameters

  wrap | the wrap mode of the curve.

Returns
  the newly created curve.

## stp_curve_create_copy()

stp_curve_t * stp_curve_create_copy | ( | const stp_curve_t * | curve | ) |

extern

Copy and allocate a curve.

dest will be created, and then the contents of source will be copied into it. dest must not have been previously allocated with stp_curve_create().

Parameters

  curve | the source curve.

Returns
  the new copy of the curve.

## stp_curve_create_from_file()

stp_curve_t * stp_curve_create_from_file | ( | const char * | file | ) |

extern

Create a curve from a stream.

Warning
  NOTE that these calls are not thread-safe! These routines may manipulate the locale to achieve a safe representation.

Parameters

  file | the file to read.

Returns
  the newly created curve, or NULL if an error occurred.

## stp_curve_create_from_stream()

stp_curve_t * stp_curve_create_from_stream | ( | FILE * | fp | ) |

extern

Create a curve from a stream.

Warning
  NOTE that these calls are not thread-safe! These routines may manipulate the locale to achieve a safe representation.

Parameters

  fp | the stream to read.

Returns
  the newly created curve, or NULL if an error occurred.

## stp_curve_create_from_string()

stp_curve_t * stp_curve_create_from_string | ( | const char * | string | ) |

extern

Create a curve from a string.

Warning
  NOTE that these calls are not thread-safe! These routines may manipulate the locale to achieve a safe representation.

Parameters

  string | the string to read.

Returns
  the newly created curve, or NULL if an error occurred.

## stp_curve_create_reverse()

stp_curve_t * stp_curve_create_reverse | ( | const stp_curve_t * | curve | ) |

extern

Reverse and allocate a curve.

dest will be created, and then the contents of source will be copied into it. dest must not have been previously allocated with stp_curve_create().

Parameters

  curve | the source curve.

Returns
  the new copy of the curve.

## stp_curve_destroy()

void stp_curve_destroy | ( | stp_curve_t * | curve | ) |

extern

Destroy an curve.

It is an error to destroy the curve more than once.

Parameters

  curve | the curve to destroy.

## stp_curve_get_bounds()

void stp_curve_get_bounds | ( | const stp_curve_t * | curve,
|  | double * | low,
|  | double * | high
| ) |  |

extern

Get the lower and upper bounds on a curve.

Parameters

  curve | the curve to use.
  low | a pointer to a double to store the lower bound in.
  high | a pointer to a double to store the upper bound in.

## stp_curve_get_data()

const double * stp_curve_get_data | ( | const stp_curve_t * | curve,
|  | size_t * | count
| ) |  |

extern

Get a pointer to the curve's raw data.

Parameters

  curve | the curve to use.
  count | a pointer to a size_t to store the curve size in.

Returns
  a pointer to the curve data. This data is not guaranteed to be valid beyond the next non-const curve call. If the curve is a pure gamma curve (no associated points), NULL is returned and the count is 0. This call also returns NULL if the curve is a piecewise curve.

## stp_curve_get_data_points()

const stp_curve_point_t * stp_curve_get_data_points | ( | const stp_curve_t * | curve,
|  | size_t * | count
| ) |  |

extern

Get a pointer to the curve's raw data as points.

Parameters

  curve | the curve to use.
  count | a pointer to a size_t to store the curve size in.

Returns
  a pointer to the curve data. This data is not guaranteed to be valid beyond the next non-const curve call. If the curve is a pure gamma curve (no associated points), NULL is returned and the count is 0. This call also returns NULL if the curve is a dense (equally-spaced) curve.

## stp_curve_get_float_data()

const float * stp_curve_get_float_data | ( | const stp_curve_t * | curve,
|  | size_t * | count
| ) |  |

extern

Get pointer to the curve's raw data as floats.

Parameters

  curve | the curve to use.
  count | a pointer to a size_t to store the curve size in.

Returns
  a pointer to the curve data. This data is not guaranteed to be valid beyond the next non-const curve call. If the curve is a pure gamma curve (no associated points), NULL is returned and the count is 0. This also returns NULL if the curve is a piecewise curve.

## stp_curve_get_gamma()

double stp_curve_get_gamma | ( | const stp_curve_t * | curve | ) |

extern

Get the gamma value of the curve.

Returns
  the gamma value. A value of 0 indicates that the curve does not have a valid gamma value.

## stp_curve_get_int_data()

const int * stp_curve_get_int_data | ( | const stp_curve_t * | curve,
|  | size_t * | count
| ) |  |

extern

Get pointer to the curve's raw data as integers.

Parameters

  curve | the curve to use.
  count | a pointer to a size_t to store the curve size in.

Returns
  a pointer to the curve data. This data is not guaranteed to be valid beyond the next non-const curve call. If the curve is a pure gamma curve (no associated points), NULL is returned and the count is 0. This also returns NULL if the curve is a piecewise curve.

## stp_curve_get_interpolation_type()

stp_curve_type_t stp_curve_get_interpolation_type | ( | const stp_curve_t * | curve | ) |

extern

Get the curve interpolation type.

Parameters

  curve | the curve to use.

Returns
  the interpolation type.

## stp_curve_get_long_data()

const long * stp_curve_get_long_data | ( | const stp_curve_t * | curve,
|  | size_t * | count
| ) |  |

extern

Get pointer to the curve's raw data as longs.

Parameters

  curve | the curve to use.
  count | a pointer to a size_t to store the curve size in.

Returns
  a pointer to the curve data. This data is not guaranteed to be valid beyond the next non-const curve call. If the curve is a pure gamma curve (no associated points), NULL is returned and the count is 0. This also returns NULL if the curve is a piecewise curve.

## stp_curve_get_point()

int stp_curve_get_point | ( | const stp_curve_t * | curve,
|  | size_t | where,
|  | double * | data
| ) |  |

extern

Get a point along the curve.

Parameters

  curve | the curve to use.
  where | the point to get.
  data | a pointer to a double to store the value of where in.

Returns
  FALSE if where is outside of the number of valid points. This also returns NULL if the curve is a piecewise curve.

## stp_curve_get_range()

void stp_curve_get_range | ( | const stp_curve_t * | curve,
|  | double * | low,
|  | double * | high
| ) |  |

extern

## stp_curve_get_sequence()

const stp_sequence_t * stp_curve_get_sequence | ( | const stp_curve_t * | curve | ) |

extern

Get the underlying stp_sequence_t data structure which stp_curve_t is derived from.

This can be used for fast access to the raw data.

Parameters

  curve | the curve to use.

Returns
  the stp_sequence_t. If the curve is a piecewise curve, the sequence returned is NULL;

## stp_curve_get_short_data()

const short * stp_curve_get_short_data | ( | const stp_curve_t * | curve,
|  | size_t * | count
| ) |  |

extern

Get pointer to the curve's raw data as shorts.

Parameters

  curve | the curve to use.
  count | a pointer to a size_t to store the curve size in.

Returns
  a pointer to the curve data. This data is not guaranteed to be valid beyond the next non-const curve call. If the curve is a pure gamma curve (no associated points), NULL is returned and the count is 0. This also returns NULL if the curve is a piecewise curve.

## stp_curve_get_subrange()

stp_curve_t * stp_curve_get_subrange | ( | const stp_curve_t * | curve,
|  | size_t | start,
|  | size_t | count
| ) |  |

extern

Get a curve containing a subrange of data.

If the start or count is invalid, the returned curve will compare equal to NULL (i. e. it will be a null pointer). start and count must not exceed the number of points in the curve, and count must be at least 2. The curve must be a dense (equally-spaced) curve

Parameters

  curve | the curve to use.
  start | the start of the subrange.
  count | the number of point starting at start.

Returns
  a curve containing the subrange. The returned curve is non-wrapping.

## stp_curve_get_uint_data()

const unsigned int * stp_curve_get_uint_data | ( | const stp_curve_t * | curve,
|  | size_t * | count
| ) |  |

extern

Get pointer to the curve's raw data as unsigned integers.

Parameters

  curve | the curve to use.
  count | a pointer to a size_t to store the curve size in.

Returns
  a pointer to the curve data. This data is not guaranteed to be valid beyond the next non-const curve call. If the curve is a pure gamma curve (no associated points), NULL is returned and the count is 0. This also returns NULL if the curve is a piecewise curve.

## stp_curve_get_ulong_data()

const unsigned long * stp_curve_get_ulong_data | ( | const stp_curve_t * | curve,
|  | size_t * | count
| ) |  |

extern

Get pointer to the curve's raw data as unsigned longs.

Parameters

  curve | the curve to use.
  count | a pointer to a size_t to store the curve size in.

Returns
  a pointer to the curve data. This data is not guaranteed to be valid beyond the next non-const curve call. If the curve is a pure gamma curve (no associated points), NULL is returned and the count is 0. This also returns NULL if the curve is a piecewise curve.

## stp_curve_get_ushort_data()

const unsigned short * stp_curve_get_ushort_data | ( | const stp_curve_t * | curve,
|  | size_t * | count
| ) |  |

extern

Get pointer to the curve's raw data as unsigned shorts.

Parameters

  curve | the curve to use.
  count | a pointer to a size_t to store the curve size in.

Returns
  a pointer to the curve data. This data is not guaranteed to be valid beyond the next non-const curve call. If the curve is a pure gamma curve (no associated points), NULL is returned and the count is 0. This also returns NULL if the curve is a piecewise curve.

## stp_curve_get_wrap()

stp_curve_wrap_mode_t stp_curve_get_wrap | ( | const stp_curve_t * | curve | ) |

extern

Get the wrapping mode.

Parameters

  curve | the curve to use.

Returns
  the wrapping mode.

## stp_curve_interpolate_value()

int stp_curve_interpolate_value | ( | const stp_curve_t * | curve,
|  | double | where,
|  | double * | result
| ) |  |

extern

Interpolate a point along the curve.

Parameters

  curve | the curve to use.
  where | the point to interpolate.
  result | a pointer to double to store the value of where in. If interpolation would produce a value outside of the allowed range (as could happen with spline interpolation), the value is clipped to the range.

Returns
  FALSE if 'where' is less than 0 or greater than the number of points, an error is returned. Also returns FALSE if the curve is a piecewise curve.

## stp_curve_is_piecewise()

int stp_curve_is_piecewise | ( | const stp_curve_t * | curve | ) |

extern

Determine whether the curve is piecewise.

Parameters

  curve | the curve to use.

Returns
  whether the curve is piecewise

## stp_curve_resample()

int stp_curve_resample | ( | stp_curve_t * | curve,
|  | size_t | points
| ) |  |

extern

Resample a curve (change the number of points).

This does not destroy the gamma value of a curve. Points are interpolated as required; any interpolation that would place points outside of the bounds of the curve will be clipped to the bounds. The resulting curve is always dense (equally-spaced). This is the correct way to convert a piecewise curve to an equally-spaced curve.

Parameters

  curve | the curve to use (must not exceed 1048576).
  points | the number of points.

Returns
  FALSE if the number of points is invalid (less than two, except that zero points is permitted for a gamma curve).

## stp_curve_rescale()

int stp_curve_rescale | ( | stp_curve_t * | curve,
|  | double | scale,
|  | stp_curve_compose_t | mode,
|  | stp_curve_bounds_t | bounds_mode
| ) |  |

extern

Rescale a curve (multiply all points by a scaling constant).

This also rescales the bounds. Note that this currently destroys the gamma property of the curve.

Parameters

  curve | the curve to use.
  scale | the scaling factor.
  mode | the composition mode.
  bounds_mode | the bounds exceeding mode.

Returns
  FALSE if this would exceed floating point limits

## stp_curve_reverse()

void stp_curve_reverse | ( | stp_curve_t * | dest,
|  | const stp_curve_t * | source
| ) |  |

extern

Reverse a curve.

Both dest and source must be valid curves previously created with stp_curve_create().

Parameters

  dest | the destination curve.
  source | the source curve.

## stp_curve_set_bounds()

int stp_curve_set_bounds | ( | stp_curve_t * | curve,
|  | double | low,
|  | double | high
| ) |  |

extern

Set the lower and upper bounds on a curve.

To change the bounds adjusting data as required, use stp_curve_rescale instead.

Parameters

  curve | the curve to use.
  low | the lower bound.
  high | the upper bound.

Returns
  FALSE if any existing points on the curve are outside the bounds.

## stp_curve_set_data()

int stp_curve_set_data | ( | stp_curve_t * | curve,
|  | size_t | count,
|  | const double * | data
| ) |  |

extern

Set all data points of the curve.

If any of the data points fall outside the bounds, the operation is not performed and FALSE is returned. This creates a curve with equally-spaced points.

Parameters

  curve | the curve to use.
  count | the number of points (must be at least two and not more than 1048576).
  data | a pointer to an array of doubles (must be at least count in size).

Returns
  1 on success, 0 on failure.

## stp_curve_set_data_points()

int stp_curve_set_data_points | ( | stp_curve_t * | curve,
|  | size_t | count,
|  | const stp_curve_point_t * | data
| ) |  |

extern

Set all data points of the curve.

If any of the data points fall outside the bounds, the operation is not performed and FALSE is returned. This creates a piecewise curve.

Parameters

  curve | the curve to use.
  count | the number of points (must be at least two and not more than 1048576).
  data | a pointer to an array of points (must be at least count in size). The first point must have X=0, and each point must have an X value at least .000001 greater than the previous point. If the curve is not a wraparound curve, the last point must have X=1.

Returns
  1 on success, 0 on failure.

## stp_curve_set_float_data()

int stp_curve_set_float_data | ( | stp_curve_t * | curve,
|  | size_t | count,
|  | const float * | data
| ) |  |

extern

Set the data points in a curve from float values.

If any of the data points fall outside the bounds, the operation is not performed and FALSE is returned. This creates a curve with equally-spaced points.

Parameters

  curve | the curve to use.
  count | the number of the number of points (must be at least two and not more than 1048576).
  data | a pointer to an array of floats (must be at least count in size).

Returns
  1 on success, 0 on failure.

## stp_curve_set_gamma()

int stp_curve_set_gamma | ( | stp_curve_t * | curve,
|  | double | f_gamma
| ) |  |

extern

Set the gamma of a curve.

This replaces all existing points along the curve. The bounds are set to 0..1. If the gamma value is positive, the function is increasing; if negative, the function is decreasing. Count must be either 0 or at least 2. If the count is zero, the gamma of the curve is set for interpolation purposes, but points cannot be assigned to. It is illegal to set gamma on a wrap-mode curve. The resulting curve is treated as a dense (equally-spaced) curve.

Parameters

  curve | the curve to use.
  f_gamma | the gamma value to set.

Returns
  FALSE if the gamma value is illegal (0, infinity, or NaN), or if the curve wraps around.

## stp_curve_set_int_data()

int stp_curve_set_int_data | ( | stp_curve_t * | curve,
|  | size_t | count,
|  | const int * | data
| ) |  |

extern

Set the data points in a curve from integer values.

If any of the data points fall outside the bounds, the operation is not performed and FALSE is returned. This creates a curve with equally-spaced points.

Parameters

  curve | the curve to use.
  count | the number of the number of points (must be at least two and not more than 1048576).
  data | a pointer to an array of integers (must be at least count in size).

Returns
  1 on success, 0 on failure.

## stp_curve_set_interpolation_type()

int stp_curve_set_interpolation_type | ( | stp_curve_t * | curve,
|  | stp_curve_type_t | itype
| ) |  |

extern

Set the curve interpolation type.

Parameters

  curve | the curve to use.
  itype | the interpolation type.

Returns
  1 on success, or 0 if itype is invalid.

## stp_curve_set_long_data()

int stp_curve_set_long_data | ( | stp_curve_t * | curve,
|  | size_t | count,
|  | const long * | data
| ) |  |

extern

Set the data points in a curve from long values.

If any of the data points fall outside the bounds, the operation is not performed and FALSE is returned. This creates a curve with equally-spaced points.

Parameters

  curve | the curve to use.
  count | the number of the number of points (must be at least two and not more than 1048576).
  data | a pointer to an array of longs (must be at least count in size).

Returns
  1 on success, 0 on failure.

## stp_curve_set_point()

int stp_curve_set_point | ( | stp_curve_t * | curve,
|  | size_t | where,
|  | double | data
| ) |  |

extern

Set a point along the curve.

This call destroys any gamma value assigned to the curve.

Parameters

  curve | the curve to use.
  where | the point to set.
  data | the value to set where to.

Returns
  FALSE if data is outside the valid bounds or if where is outside the number of valid points. This also returns NULL if the curve is a piecewise curve.

## stp_curve_set_short_data()

int stp_curve_set_short_data | ( | stp_curve_t * | curve,
|  | size_t | count,
|  | const short * | data
| ) |  |

extern

Set the data points in a curve from short values.

If any of the data points fall outside the bounds, the operation is not performed and FALSE is returned. This creates a curve with equally-spaced points.

Parameters

  curve | the curve to use.
  count | the number of the number of points (must be at least two and not more than 1048576).
  data | a pointer to an array of shorts (must be at least count in size).

Returns
  1 on success, 0 on failure.

## stp_curve_set_subrange()

int stp_curve_set_subrange | ( | stp_curve_t * | curve,
|  | const stp_curve_t * | range,
|  | size_t | start
| ) |  |

extern

## stp_curve_set_uint_data()

int stp_curve_set_uint_data | ( | stp_curve_t * | curve,
|  | size_t | count,
|  | const unsigned int * | data
| ) |  |

extern

Set the data points in a curve from unsigned integer values.

If any of the data points fall outside the bounds, the operation is not performed and FALSE is returned. This creates a curve with equally-spaced points.

Parameters

  curve | the curve to use.
  count | the number of the number of points (must be at least two and not more than 1048576).
  data | a pointer to an array of unsigned integers (must be at least count in size).

Returns
  1 on success, 0 on failure.

## stp_curve_set_ulong_data()

int stp_curve_set_ulong_data | ( | stp_curve_t * | curve,
|  | size_t | count,
|  | const unsigned long * | data
| ) |  |

extern

Set the data points in a curve from unsigned long values.

If any of the data points fall outside the bounds, the operation is not performed and FALSE is returned. This creates a curve with equally-spaced points.

Parameters

  curve | the curve to use.
  count | the number of the number of points (must be at least two and not more than 1048576).
  data | a pointer to an array of unsigned longs (must be at least count in size).

Returns
  1 on success, 0 on failure.

## stp_curve_set_ushort_data()

int stp_curve_set_ushort_data | ( | stp_curve_t * | curve,
|  | size_t | count,
|  | const unsigned short * | data
| ) |  |

extern

Set the data points in a curve from unsigned short values.

If any of the data points fall outside the bounds, the operation is not performed and FALSE is returned. This creates a curve with equally-spaced points.

Parameters

  curve | the curve to use.
  count | the number of the number of points (must be at least two and not more than 1048576).
  data | a pointer to an array of unsigned shorts (must be at least count in size).

Returns
  1 on success, 0 on failure.

## stp_curve_write()

int stp_curve_write | ( | FILE * | file,
|  | const stp_curve_t * | curve
| ) |  |

extern

Write a curve to a file.

The printable representation is guaranteed to contain only 7-bit printable ASCII characters, and is null-terminated. The curve will not contain any space, newline, single quote, or comma characters. Furthermore, a printed curve will be read back correctly in all locales. These calls are not guaranteed to provide more than 6 decimal places of precision or +/-0.5e-6 accuracy, whichever is less.

Warning
  NOTE that these calls are not thread-safe! These routines may manipulate the locale to achieve a safe representation.

Parameters

  file | the file to write.
  curve | the curve to use.

Returns
  1 on success, 0 on failure.

## stp_curve_write_string()

char * stp_curve_write_string | ( | const stp_curve_t * | curve | ) |

extern

Write a curve to a string.

The printable representation is guaranteed to contain only 7-bit printable ASCII characters, and is null-terminated. The curve will not contain any space, newline, or comma characters. Furthermore, a printed curve will be read back correctly in all locales. These calls are not guaranteed to provide more than 6 decimal places of precision or +/-0.5e-6 accuracy, whichever is less.

Warning
  NOTE that these calls are not thread-safe! These routines may manipulate the locale to achieve a safe representation.

Parameters

  curve | the curve to use.

Returns
  a pointer to a string. This is allocated on the heap, and it is the caller's responsibility to free it.